Image of a vapor leak coming from a tube with the VisionAery Vapor leak detection applicat

Vapor Detection

Vapor Leaks are among one of the most dangerous and costly events to happen within industry, and early detection is key to reduce safety hazards and minimize clean up costs. The VisionAery Vapor Detection solution has been trained with real videos from real scenarios. This means that there was no synthetic data used to train this app which makes it more accurate then any other solution at detecting in real life scenarios.

Compatible Platforms

Jetson Orin

Great for large scale deployments that utilize existing cameras. The NVIDIA platform gives you flexible options while providing enough power to run full scale models with a high inference rate.

Scalability

Orin Nano - 1-2 streams
Orin NX - 4-6 streams
Orin AGX - 8-12 streams
Chips are stackable within servers for increased streams per server.

Pros

Camera Agnostic
Ruggedized
Multiple Streams per Server
Easier for Custom Deployment Needs

Cons

Complex Set Up
Adds to Hardware Cost
Additional Hardware Maintenance
Temp Ranges do not meet all conditions
Power Requirements

Industry Use Cases

Oil and Gas

Relief‑valve stacks
Compressor dry‑gas seals
Tank breather vents
Vapor‑recovery headers
Flare knock‑out drums
Pig launcher/receiver vents
Wellhead annulus bleeds
Gas dehydrator still columns
Stabilizer overhead lines
Truck / rail loading arms

Chemical and Gas

Reactor vent condensers
Scrubber outlet stacks
Railcar loading domes
Bulk‑storage tank vents
Pressure‑swing exhausts
Acid gas neutralizer vents
refrigeration purges
Chlorine cylinder headers
HF alkylation blow‑down
Gas‑bottle fill manifolds

Water Wastewater

Digester gas domes
Chlorine gas injection
Generator off‑gas vents
Ammonia tank vents
Well ventilation stacks
Sludge dryer exhausts
Chemical scrubber outlets
Headworks odor hoods
Biofilter roof vents
Methane flare headers

Power Generation

Boiler steam‑drum vents
Gland‑steam seals
HRSG blow‑off stacks
Hydrogen‑seal oil vents
Ammonia injection points
Condenser vacuum reliefs
Feed‑pump stuffing boxes
Drift eliminators
Fuel‑gas heater vents
Lube‑oil mist extractors

a vapor leak coming from an indoor industrial environment with the VisionAery vapor detec

Detection Model

Trained with only real footage with no synthetic data.
Application Works in the Day Time with Visual Spectrum and at Night with NIR Spectrum.
Detect Leaks that are Behind Objects and Obstructions

Request Demo

Add as Many Interest and Exclusion Zones as You Want Per FOV.
Assign Zones to Specific PTZ Presets.
Get Alerts and Telemetry Data Based on the Zone the Leak is Detected In.

Request Demo

VisionAery Interest and Exclusion Zone user interface

Interest and Exclusion Zones

VisionAery Alarm
Verification System

100% Edge Based.
Custom Built Vision Language Model for Vapor Detection.
Verify All Alarms with More In Depth Analysis Before Triggering Final Alarm .

Request Demo

Data and Alarms

Send Telemetry Data via MQTT or Modbus TCP.
Send Alarm Topics via MQTT or Modbus TCP.
Easily Integrate Data into Existing Systems such as SCADA or Video Management Software.

Sensors

Use Sensors such as rain sensors to mitigate false positives from environmental conditions.
Integrate other sensor data to get more rich and characteristic data from system.
Create Conditional Alarms that need sensor input before triggering.

Camera and VMS

All you need is an RTSP stream from any camera of your choice.
The system generates an RTSP stream for easy viewing of the system into your VMS.
Use Pre Built VMS Integrations for most major VMS providers.

System Architecture

All VisionAery Solutions are Uncompromisingly edge based so that they remain easy to integrate into your existing network and infrastructure as well as maintaining scalability and reduced operational cost to maintain the system.

Supporting Software

VisionAery Downloads all of the below software to help make your deployment and management of the system easier. This is at no additional cost to you.